System Sensor CHRL ceiling or wall mounting Chime Only

  • Sale
  • $33.64
  • Regular price $57.50


SpectrAlert Advance chimes and chime/strobes shall mount to a standard 4 × 4 × 1½-inch back box, 4-inch octagon back box, single-gang 2 × 4 × 17/8-inch back box, or double-gang back box. A universal mounting plate shall be used for mounting products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between nine and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC, or full-wave rectified, unfiltered power supply. Chime/strobes shall have field-selectable candela settings of 15, 15/75, 30, 75, 95, 110 and 115.have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185.

Features

  • Plug-in design
  • Shorting spring on mounting plate for pre-installation continuity check
  • Captive mounting screw
  • Torx screw for tamper resistance
  • Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110, and 115 cd
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • Minimal intrusion into the back box
  • Rotary switch for tone selection
  • Two volume settings
  • Electrically compatible with existing SpectrAlert products
  • Listed for ceiling or wall mounting)
  • Wall mount dimensions (including lens): 5.6"L × 4.7"W × 1.3"D (142 mm L × 119 mm W × 33 mm D)