Gamewell-FCI ILI-S-E3 The Intelligent Loop Interface Expansion Board


Gamewell-FCI ILI-S-E3 The Intelligent Loop Interface Expansion Board

  • Sale
  • $1,301.60

**CALL FOR AVAILABILITY**


**FCI Products can only be purchased in the State of Florida**
The Intelligent Loop Interface - Expansion Board (ILI-S-E3) provides the E3 Series control panel with two additional electrically isolated signaling line circuits. The layout is similar to the ILI-MB-E3 except a number of components are omitted. The ILI-S-E3 occupies one node on the Broadband network. The ILI-S-E3 provides two signaling line circuits and terminals for the connections to up to 159 detectors, 159 modules and 159 addressable sounder bases per SLC in Velociti mode. In CLIP mode, each SLC supports 99 detectors and 99 modules.

Features

  • E3 Series Expandable Emergency Evacuation System.
  • E3 Series Combined Fire and Mass Notification System.
  • This intuitive design provides the following features:
  • 2 signaling line circuits auxiliary power output.
  • local energy city box output auxiliary relay functions.
  • 2 notification application circuits.

These features, combined with the built-in network and the serial protocols, allow this module to support a host of new and existing products, resulting in a building block approach to the fire alarm panel design. The ILI-MB-E3 is network ready and occupies 1 of 64 nodes operating at 625K baud. In addition, the Addressable Node Expander (ANX) board expands the network to 122 nodes. When this sub-assembly is integrated with proven Broadband components, the result is a flexible yet powerful integrated audio solution. When the system transmits to remote locations, the optional RPT-E3 provides the ILI-MB-E3 with valuable signal boosting and transient protection, as well as connectivity using both wire and fiberoptic cables. The ILI-MB-E3 provides 2 signaling line circuits and terminals for the connections to up to 159 detectors, 159 modules and 159 addressable sounder bases per SLC in Velociti®. In CLIP™ mode, each SLC supports 99 detectors and 99 modules. The RS-485 interface can support a variety of peripheral devices.

Installation

  • Typically, the ILI-MB-E3 or ILI-S-E3 can be mounted in the following E3 Series cabinets:
  •  Cabinet B and D, backbox 
  • Cabinet C, INX-E3 sub-assembly plate 
  • Cabinet C, INCC-E3 sub-assembly plate.