Firelite ES-50X Addressable Fire Alarm Panel 50 Points-Currently In Stock

  • Sale
  • Regular price $1,250.00



The ES-50X is the latest intelligent addressable fire alarm control panel (FACP) from FireLite Alarms and is a direct replacement for the MS-9050UD/LS. The ES-50X comes with a preinstalled communicator and supports up to 50 addressable devices in any combination of detectors or modules. With an extensive list of powerful features,the ES-50X programs just like Fire•Lite’s other addressable panels,yet fits into applications previously served only by conventional panels.The preinstalled IPOTS-COM is a dual technology (POTS and IP)communicator. The POTS transmits system status (alarms, troubles,AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-FL.Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable)or via an Ethernet connection using the IPOTS-COM communicator.The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system volt-ages by means of a USB flash drive.The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polarity/city box transmitter (4XTMF).

 

Features
• Listed to UL Standard 864, 10th edition
• Preinstalled IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator
• Optional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet®
• Compatible with SWIFT® wireless devices
• Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address
• Two independently programmable, built-in Style Z (Class A) or Style Y (Class B) NAC circuits
• Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices
• Notification Appliance Circuit End of Line resistor matching
• Four programmable function keys for ease of maintenance
• Two programmable relays and one fixed trouble relay
• Built-in Programmer
• Integral 80-character LCD display with backlighting
• Real-time clock/calendar with automatic daylight savings control
• History file with 1,000 event capacity
• Addressable sounder base
• Multi-criteria detector (smoke, heat, CO) with programmable response
• Control module delay timer
• Automatic detector sensitivity testing (NFPA 72 compliant)
• Automatic device type-code verification
• Point trouble identification
• Waterflow selection per module point
• Alarm verification selection per detector point SLC COMMUNICATION LOOP
• Supports LiteSpeed™ and CLIP protocols
• SLC operates up to 10,000 ft. (3,000 m) in LiteSpeed mode with twisted, unshielded wire
• Single addressable SLC loop which meets NFPA Class B and Class A requirements
• 50 addressable device capacity (any combination of addressable detectors and modules)
• Compatible with FireLite’s addressable devices (refer to the SLC Wiring Manual) NOTIFICATION APPLIANCE CIRCUITS (NACS)
• Two independently programmable output circuits. Circuits can be configured for the following outputs:
–Style Y (Class B)
–Style Z (Class A)
• Silence Inhibit and Auto silence timer options
• Continuous, March Time, Temporal, or California code for main circuit board NACs with two-stage capability
• Selectable strobe synchronization per NAC
• 2.5 A special application, 250mA regulated, total power for NACs