System Sensor SPSCRH Ceiling Mount Speaker/Strobe

  • Sale
  • Regular price $78.99


**CALL FOR AVAILABILITY**

SpectrAlert Advance speaker and speaker strobes shall mount to a 4 × 4 × 21?8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes, when used with the Sync•Circuit™ Module accessory, shall be powered from a non- coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between nine and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32°F and 120°F from a regulated DC, or full-wave rectified, unfiltered power supply. Selectable strobe settings of 135, 150, 177 and 185 cd.

Features

  • Plug-in design and protective cover reduce ground faults
  • Universal mounting plate with an onboard shorting spring tests wiring continuity before installation
  • No extension ring required
  • Selectable high-candela strobe settings of 135, 150, 177 and 185 cd
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (¼, ½, 1 and 2 watts)
  • SP speakers offer high fidelity sound output
  • SPV speakers offer high volume sound output
  • Compatible with System Sensor synchronization protocol
  • Electrical compatibility with existing SpectrAlert products
  • Optional tamper resistant Torx head screw included
  • Listed for ceiling mounting
  • Ceiling mount dimensions (including lens): 6.8" dia × 4.7" d